Having used the BBQ for the Bashfest at the start of May, it's clear that the BBQ needed a re-paint on the tank at the minimum as it's showing signs of surface rust.
As it was:
(Rear was by far the worst bit)
So, this weekend i started the process - got a couple of wire wheels (one on the drill and one on grinder) and gave the tank a good going over to remove all the rust on it and smooth things out a bit.
Once that was done i masked off the shiny bits and started giving it a few coats of Matt black VHT Enamel BBQ paint, so it currently looks like this:
It's had 3 / 4 coats now so has a good covering, typically i had to change paint manufacturer half way through the last coat, so it's a bit odd at the moment as although they were both matt black enamel bbq paint - they are different shades, so it'll probably get another 1 or 2 coats of the new, darker paint to have just 1 colour and then i'll fire it up to cure it and see what it looks like after that!!
(New album in the MKB BBQ Gallery -?
http://bbq.mkb.cc/gallery)