with the inner fenders and most of the flat metal work,
i cleaned it back with a wire wheel, rust proofed it twice with granvile h/d rust cure, gave it a coat of hammerite,
then used tetroseal underseal, two coats of spray for the bits ya can see,
and two applications with a brush,underneath, one painted flat, the other weeks later, stippled on with a brush,
a good few hrs on a crawler trolly, thats why the car was nearly 3 foot of the ground...
i'll be round to do the caddy when this uns finished.....
[note to self; project cars are never finished]