MKB Forum

General MKB => General Banter => Topic started by: F Body on October 13, 2007, 11:21:20 am

Title: Come On Scumbags.
Post by: F Body on October 13, 2007, 11:21:20 am

I'd like to see you get the gear change lever off the Beatch now (http://www.mkb.cc/forum/smileys/tongue.gif)

(http://i29.photobucket.com/albums/c294/fbody007/Lifan%20GY200/GearLeveretc.jpg?t=1192274118\" border=\"0\"  alt=\"\" width=150>Yep been doing some welding : [img]http://i29.photobucket.com/albums/c294/fbody007/Lifan%20GY200/BikewithWelderetc.jpg?t=1192274078\" border=\"0\"  alt=\"\" width=150>Kickstart & foot rest etc. [img]http://i29.photobucket.com/albums/c294/fbody007/Lifan%20GY200/Kickstart.jpg?t=1192274144\" border=\"0\"  alt=\"\" width=150>Never bolted the battery box up before just relied on the rubber strap, so I've fitted 75mm long M8 bolts with nylock nuts/ washers. So you need a long micro socket on a battery gun and a small ring spanner to get them off [img]http://www.mkb.cc/forum/smileys/wink.gif)

(http://i29.photobucket.com/albums/c294/fbody007/Lifan%20GY200/BatteryBox.jpg?t=1192274291\" border=\"0\"  alt=\"\" width=150>Also did the side stand and clutch & brake levers : [img]http://i29.photobucket.com/albums/c294/fbody007/Lifan%20GY200/Clutchlever.jpg?t=1192274419\" border=\"0\"  alt=\"\" width=150>If I need to get anything off I'll just get my grinder out, I think the whole bike will go next [img]http://www.mkb.cc/forum/smileys/sad.gif)

Title: Come On Scumbags.
Post by: F Body on October 14, 2007, 12:57:41 pm

Dam went out on the Beatch this morning and after about 20 miles it got stuck in top gear (http://www.mkb.cc/forum/smileys/sad.gif)
Thought it was something to do with my welding, but it turned out to be a crankcase screw, looks like the Numpties who stole the gear shift stripped the thread on the screw and it fell out jaming the lever (http://www.mkb.cc/forum/smileys/devil.gif)

I've also added another security light above the bike ( £7.99 from Wilkinson ) (http://www.mkb.cc/forum/smileys/wink.gif)

[img]http://i29.photobucket.com/albums/c294/fbody007/Lifan%20GY200/CIMG3718.jpg?t=1192366631\" border=\"0\"  alt=\"\" width=150>

Title: Come On Scumbags.
Post by: ianjpage on October 14, 2007, 08:21:55 pm

ere martyn, your lights not straight (http://www.mkb.cc/forum/smileys/rofls.gif)

Title: Come On Scumbags.
Post by: 55starchief on October 14, 2007, 08:24:15 pm

I like the way he has added the light to help the little scrouts. The problem with PIR lights is that everything sets them off so people just ignore them

Title: Come On Scumbags.
Post by: art b on October 14, 2007, 08:55:44 pm

is that a mole, lookin out from the hangin tiles   (http://www.mkb.cc/forum/smileys/dontknow.gif)
 if it is hes a bit fookin lost..(http://www.mkb.cc/forum/smileys/confused.gif).......(http://www.mkb.cc/forum/smileys/rofls.gif)

Title: Come On Scumbags.
Post by: 55starchief on October 14, 2007, 08:57:44 pm

Quoting: art b

f it is hes a bit fookin lost.........

Thats ground level outback mate so i guess he just went through the house (http://www.mkb.cc/forum/smileys/rofls.gif)

Title: Come On Scumbags.
Post by: Roadkill on October 15, 2007, 07:17:47 am

Hope you ground that weld off a little, Martyn . . . looks a little blobby. (http://www.mkb.cc/forum/smileys/tongue.gif)