Author Topic: Come On Scumbags. (Read 410 times)

F Body · « **on:** October 13, 2007, 11:21:20 am »

I'd like to see you get the gear change lever off the Beatch now

Yep been doing some welding : [img]http://i29.photobucket.com/albums/c294/fbody007/Lifan%20GY200/BikewithWelderetc.jpg?t=1192274078\" border=\"0\" alt=\"\" width=150>Kickstart & foot rest etc. [img]http://i29.photobucket.com/albums/c294/fbody007/Lifan%20GY200/Kickstart.jpg?t=1192274144\" border=\"0\" alt=\"\" width=150>Never bolted the battery box up before just relied on the rubber strap, so I've fitted 75mm long M8 bolts with nylock nuts/ washers. So you need a long micro socket on a battery gun and a small ring spanner to get them off [img]http://www.mkb.cc/forum/smileys/wink.gif" alt="" border="0" onload="NcodeImageResizer.createOn(this);" class="bbc_img" />

Also did the side stand and clutch & brake levers : [img]http://i29.photobucket.com/albums/c294/fbody007/Lifan%20GY200/Clutchlever.jpg?t=1192274419\" border=\"0\" alt=\"\" width=150>If I need to get anything off I'll just get my grinder out, I think the whole bike will go next [img]http://www.mkb.cc/forum/smileys/sad.gif" alt="" border="0" onload="NcodeImageResizer.createOn(this);" class="bbc_img" />

F Body · « **Reply #1 on:** October 14, 2007, 12:57:41 pm »

Dam went out on the Beatch this morning and after about 20 miles it got stuck in top gear

Thought it was something to do with my welding, but it turned out to be a crankcase screw, looks like the Numpties who stole the gear shift stripped the thread on the screw and it fell out jaming the lever

I've also added another security light above the bike ( £7.99 from Wilkinson )

[img]http://i29.photobucket.com/albums/c294/fbody007/Lifan%20GY200/CIMG3718.jpg?t=1192366631\" border=\"0\" alt=\"\" width=150>

ianjpage · « **Reply #2 on:** October 14, 2007, 08:21:55 pm »

ere martyn, your lights not straight

55starchief · « **Reply #3 on:** October 14, 2007, 08:24:15 pm »

I like the way he has added the light to help the little scrouts. The problem with PIR lights is that everything sets them off so people just ignore them

art b · « **Reply #4 on:** October 14, 2007, 08:55:44 pm »

is that a mole, lookin out from the hangin tiles

if it is hes a bit fookin lost..

.......

55starchief · « **Reply #5 on:** October 14, 2007, 08:57:44 pm »

Quoting: art b

f it is hes a bit fookin lost.........

Thats ground level outback mate so i guess he just went through the house

Roadkill · « **Reply #6 on:** October 15, 2007, 07:17:47 am »

Hope you ground that weld off a little, Martyn . . . looks a little blobby.

Author Topic: Come On Scumbags. (Read 410 times)

Roadkill