Author Topic: Camaro rollcage (Read 2131 times)

55starchief · « **on:** November 11, 2005, 05:02:29 pm »

http://cgi.ebay.com/ebaymotors/CAMARO-ROLL-CAGE-PRE-FAB-CHEAP-PU-ONLY-LO-START-NO-RES_W0QQcmdZViewItemQQcategoryZ107069QQitemZ4588289858QQrdZ1QQsspagenameZWDVW

Roadkill · « **Reply #1 on:** November 11, 2005, 05:18:27 pm »

Proper jigsaw, there, Mate.

FUBAR · « **Reply #2 on:** November 11, 2005, 05:24:46 pm »

no need for SFC's if you've got that installed!

55starchief · « **Reply #3 on:** November 11, 2005, 05:27:04 pm »

check the other stuff the guy has for sale, some autometer guages and switch panels

Roadkill · « **Reply #4 on:** November 11, 2005, 05:27:57 pm »

Alas, SFC's are still required . . . .

Jamieg285 · « **Reply #5 on:** November 11, 2005, 05:43:29 pm »

Yeah, SFCs would still be a must have. Roll cage would just make it even stiffer.

Will check out the switch panels later.

55starchief · « **Reply #6 on:** November 11, 2005, 05:50:53 pm »

http://www.hawksthirdgenparts.com/inc/sdetail/24280

Roadkill · « **Reply #7 on:** November 11, 2005, 06:15:31 pm »

Hmm.

55starchief · « **Reply #8 on:** November 11, 2005, 06:40:47 pm »

not a bad price mate, would look very cool aswell as adding a bit of saftey, they also have a 10 point but its a little over kill unless you were going pro street.

FUBAR · « **Reply #9 on:** November 11, 2005, 06:44:17 pm »

wouldn't you lose you're back seats putting something like that in?

55starchief · « **Reply #10 on:** November 11, 2005, 06:48:27 pm »

nah your rear seat passengers would need to slid under the rear bar

Roadkill · « **Reply #11 on:** November 11, 2005, 07:17:55 pm »

Insane !!!

http://www.hawksthirdgenparts.com/inc/sdetail/24377

55starchief · « **Reply #12 on:** November 11, 2005, 07:20:45 pm »

thats a big jump in price mate, as i said unless your going prostock the other would be fine and easier to install, even though i know some one who could install that big one

Jamieg285 · « **Reply #13 on:** November 11, 2005, 07:27:45 pm »

Never fancied a roll cage in a road car myself.

Also, don't forget to factor in the likely insurance price hike.

Roadkill · « **Reply #14 on:** November 11, 2005, 07:58:36 pm »

Quoting: Jamieg285

Also, don't forget to factor in the likely insurance price hike.

But it'd be safer !!!

Jamieg285 · « **Reply #15 on:** November 11, 2005, 08:03:19 pm »

You know that, I know that. The insurance man knows that. He also knows he can add money for nothing with it.

55starchief · « **Reply #16 on:** November 11, 2005, 08:15:27 pm »

what you mean it didnt come with that as standard nr nsurance assersor

Jamieg285 · « **Reply #17 on:** November 11, 2005, 08:25:12 pm »

"It was in there when I got it. I have no reason to believe it's not original"

Roadkill · « **Reply #18 on:** November 11, 2005, 08:36:29 pm »

It'd work. From what I've seen Third Gens collapse when rolled . . .

55starchief · « **Reply #19 on:** November 11, 2005, 08:38:24 pm »

it says that you dont need to cut the dash either which is a good thing

Roadkill · « **Reply #20 on:** November 11, 2005, 08:39:31 pm »

I Know . . . Don't tempt me further . . . . .

Jamieg285 · « **Reply #21 on:** November 11, 2005, 08:41:45 pm »

do it do it do it do it do it do it do it do it do it do it do it do it do it do it do do it do it do it do it do it do it do it do it do it do it do it do it do it do it do do it do it do it do it do it do it do it do it do it do it do it do it do it do it do do it do it do it do it do it do it do it do it do it do it do it do it do it do it do do it do it do it do it do it do it do it do it do it do it do it do it do it do it do do it do it do it do it do it do it do it do it do it do it do it do it do it do it do do it do it do it do it do it do it do it do it do it do it do it do it do it do it do

Jamieg285 · « **Reply #22 on:** November 11, 2005, 08:42:00 pm »

Jamieg285 · « **Reply #23 on:** November 11, 2005, 08:42:15 pm »

do it do it do it do it do it do it do it do it do it do it do it do it do it do it do do it do it do it do it do it do it do it do it do it do it do it do it do it do it do do it do it do it do it do it do it do it do it do it do it do it do it do it do it do do it do it do it do it do it do it do it do it do it do it do it do it do it do it do do it do it do it do it do it do it do it do it do it do it do it do it do it do it do do it do it do it do it do it do it do it do it do it do it do it do it do it do it do do it do it do it do it do it do it do it do it do it do it do it do it do it do it do

Jamieg285 · « **Reply #24 on:** November 11, 2005, 08:42:31 pm »

Author Topic: Camaro rollcage (Read 2131 times)

Roadkill

Roadkill

Roadkill

Roadkill

Roadkill

Roadkill

Roadkill