11
Projects / Re: '79 Camaro - Major surgery
« Last post by Jamieg285 on April 07, 2017, 01:11:05 pm »Pictures Update....
I (almost) finished off welding in the rear most part of the inner wheel house. Here you can see I've welded it up along the seam and the spot welds on the edge. I've started grinding back the seam, but there's a thin spot where I've gone through and need to re-do. I sprayed on some basic primer to give it a bit of protection over the winter, and will strip it back before putting the epoxy primer on.
Here's the void left just after the trunk drop off has been chopped out. It doesn't really show the rough edge very well, but I'm currently planning to make a patch that will fit the whole area between the green lines.
I (almost) finished off welding in the rear most part of the inner wheel house. Here you can see I've welded it up along the seam and the spot welds on the edge. I've started grinding back the seam, but there's a thin spot where I've gone through and need to re-do. I sprayed on some basic primer to give it a bit of protection over the winter, and will strip it back before putting the epoxy primer on.
Here's the void left just after the trunk drop off has been chopped out. It doesn't really show the rough edge very well, but I'm currently planning to make a patch that will fit the whole area between the green lines.