Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - EDGE

Pages: 1 2 [3] 4 5 ... 10
51
I picked this motor up at a local garage with the intent of making it in to a table/ornament/project of some kind.

Motor was complete, now stripped, head is good, cams are there, short block has no sump..

free to whoever can come and get it, otherwise i'll drag it down to the scrappy and weigh it in...

I have a strong feeling no one will want it, but it cant hurt to offer

52
Computers and Games / unlocking Iphones...
« on: November 10, 2009, 10:14:25 am »

53
General Banter / Anyone know AutoCAD well?
« on: October 26, 2009, 02:20:58 pm »
I find myself needing to add a road/concrete surface to a contour line map in autocad.  

Any ideas???

I've tried googling but only come up with results for revit, which as far as i can tell is an autodesk addon for autocad.

any help would be much appreciated.

cheers

54
General Banter / Big block ninja throw star of death and destruction....
« on: September 14, 2009, 11:09:36 am »
http://www.460ford.com/forum/showthread.php?t=138991

HOLY HELL......

plus i'll save titsy, martin and dean some time..

"well, it was a ford"

"what do you expect from a ford"

"typical ford"

making 800hp though my "distributors in the worng place" friends......

well... made it .......................... once

55
General Banter / 9/11 prog on C4 last night...
« on: September 08, 2009, 11:20:26 am »
i didn't see it but it makes an interesting debate subject... mass media/government press releases vs all conspiracy theorys....

it was started on another forum with 2 sentance answers... here's mine...

a few mates are WELL in to this conspiracy stuff (i didnt see what was on C4 btw so dont know if it falls in to my conspiracy bucket)...

I've watched a few things and i find it diabolical how they cut and shut fottage, take things out of context and play on human emotion to suit their own story... some of them are teribble, interviews cut up, bits of shakey footage.... and then 1000's of people loking for an 'alternative' answer fall in to them....

and then... THEN.. they try to preach at the rest of us telling us that this is what ACTUALLY happened... and they have the ultimate defence............ here it is....

if you call it a 'conspiracy' you're wrong...thats just what THEY (this is the mythical THRY again) want you to believe... so if you dont believe this (im gonna go ahead and call it what it is here) conspiracy thoery you're obviously just one of the drones who is unenlightened and believe all mass media...

so basically, they try to tell you that if you dont believe thier fuc*ed up version of events, you're an idiot drone.... so many idiots think, well.. im no idit (clearly at this point its clear that they are indeed, an idiot) I'm gonna buy in to this 'truth' theory and ppreach to all my frineds about how right i am and how thick they all must be....

They then use phrases that really make my d1ck itch.... things like...

"what you people don't understand....."

i've actually heard those EXACT words..... like 'us people' as in 'non believers' as in these fuc*tards that have watched a shed load of badly cut together bits of news real and believed them as FACT are on some higher plane of existance and now need to educate the lower echilons of the world to further themselves in the ranking of consiracy theorist fan boys....

ffs.... give me iMovie, you tube and the sky news website and I'll cut together some film footage that will show that I have been to the moon, MIchael Jackson is still alive and did indeed shot Kenedy, the brady bunch never existed, the sun isnt really there its just a lightbulb controlled by the illuminate so they can control how many hours we're awake and there is no such thing as milk, it a government controlled posion distributed by stealth assasins in electric cars to kill off (called "population control" by these assholes) the poor people leaving more money for the government which in turn is controlled by the all powerful, ever present, all seeing......... illuminate.....

God DAMN these people make my teeth ache......

and if ANY one mentions fu**ing ziterghiest or whatever it was called... i may just go fu**ing NUCELAR

fuc*ers.....


discuss........

56
General Banter / VERY impressive engineering...
« on: August 14, 2009, 05:31:38 pm »

57
General Banter / Anyone fancy coming to the london meet this saturday ??
« on: August 03, 2009, 11:57:11 am »
its 12 noon, usual place, Navigation Inn, Chingford....

anyone ?

58
General Banter / When intro credits were simple...
« on: July 29, 2009, 09:20:03 am »


AND from when they contained a tuba!!!!



or even when the credits contained the whole story

(i do have all 6DVDs of this )

how about when phillip scoffield was young, and eveyone in the 31st century dressed like Knights Templar


a personal favourite

mainly because Chetarra was SMOKIN hot !!!!!!!

oh... and definitive proof that the 80's were better than the 90s.... Snarf could kick Pikatchu's ASS... that FINALLY settles the argument over which was the better decade.... well added to the fact that the 80's gave us AWESOME music and films where as the 90's in its infinite wisdom bestowed upon us the one they call Peter Andre...... fin.

this one was just sureal.. i remeber watching this in the very VERY early 80s..


how about this one, full of all the right things... a thrown away teddy bear, a spotty man from outter space, cosmic dust and a magic cloud..

I STILL have my original superted from the 80s, complete with velcrod on teddy exterior that unpeals to reveal the red costume underneath.. and he came with a passport... how odd.... although it is stamped by the Greek and Cypriot imigration desks when i took him on holiday with me in 82-85.... is it wrong that I'm a little proud of that ??

that's probably eough for now.....

and to all of you with work/content filters....

bwwwwaAAHAHAHAHHAHAHAHAHAHAHAHAHHAHAHAHAHAHAHAHAHA

IN


YOUR

FACE

59
General Banter / username : rustic302
« on: July 21, 2009, 12:39:03 pm »
ring any bells with anyone.... i seem to remember that user name for some reason....

60
http://growingbolder.com/media/technology/vehicles/romancing-the-road-259598.html

watch the bit about the warranties !!!!!!

God Bless her....... she really is supergran!!!!


61
I know a couple of you are in to these kinds of things so I thought I'd put them on here first before I stick them on ebay....

Adaptec ASR-4800SAS/256MB
This is a 8 way SAS raid controller card, will do anything you need it to do! Will do up to RAID 6 (dual drive failure) and will push 3Gb/s on each channel...

Uses 64bit PCI-x slot at 133mhz

4 internal SAS ports with cables included and all the software etc.  Never been used, just opened the box to take the photos.  Retails for over £600, not looking for anywhere near that, less than half infact!






RAM - All new and unused, still in original packaging

2x Kingston KVR533D2N4/1G - 240 pin, 533Mhz DDR2, CL4, £20

2x Kingston KVR400D2N3/1G - 240 pin, 400Mhz DDR2, CL3, £20
(one of these has been opened but is mint!)

let me know!

62
General Banter / Tiny PC
« on: July 01, 2009, 10:00:59 am »
WANT !!!!!

http://www.fit-pc2.com/wiki/index.php?title=Main_Page

would be PERFECT for work... letting me use my Mac for my own things !!!

63
for while I'm changing the engine/gearbox in the fox and having it resprayed....

no... im not using the saleen as a runabout, yes... it does work... yeah blah blah blah....

so... anyone got anything theyre looking to sell or know anyone who is?

and we're talking 'cheap..... like the budgie...'

64
General Banter / No North London Meet this month....
« on: June 10, 2009, 08:39:15 pm »
Gemma has planned a whole surprise long weekend for me this weekend on account of my birthday (14th), and typically, her plan didn't include the meet...

plus Badger is on a fishing holiday, and the rest of you don't come to the meet anyways

so.. have no choice really but to cancel it :(

65
I need to paint a rear axle so was wondering if anyone had a tin left over that i could buy before I go ahead and order it from frost's

Im looking for the normal base coat and maybe either the silver or chassis black top coat

anyone got any left ?

67




was a great day out, even if i couldnt race the fox body... i got there at 9.15 and all 200 spaces were already filled.  There were people queuing outside the gates at 7.30 apparently!!!

Got a few more pics that I'll edit and post asap

68
anyone fancy coming down for lunch?

I know Ian and Vicky's bbq is in the evening, but y'all gotta eat lunch too right ?!

usual place, navigation inn, chingford at 12

would be good to see  you there if you can make it :)

69
General Banter / Credit Crunch FINALLY hits home .....
« on: April 28, 2009, 08:17:08 am »
Went shopping in Tescos today..... I was going to grab a box of Mr. Kipling's finest french fancies when I realised he's started selling them on their own.... singularly... A BOX OF ONE if you will....... fooking ridiculous...

but...i thought I'd just buy one.. i mean, i dont really need a box of 8, I'd only sit there and eat them all....

So, tonight, while you're all eating cakes and biscuits with your tea/coffee.. think of me, trying to make a SINGLE french fondant fancy last a whole night..
.
.
.
..
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.






Oh yeah...  ITS FOOKING MASSSSSSSSSSSIVE

950g of cakey goodnes right there !!!!!

(thats a full size sharpie marker too, not one f those little daft ones!!!)

70
General Banter / Now THIS takes time, patience AND dedication....
« on: April 19, 2009, 10:15:56 am »
my white board from work.....



it took a fair while, and several packets of pens... when I went away on holiday for 3 weeks I unscrewed the board from the wall, turned it over and put it back up and told everyone i'd got rid of it as i was told it was unprofessional...

worked too, got back, flipped it over and carried on....


71
General Banter / Thursday Daftness
« on: April 02, 2009, 12:38:53 pm »


ON A BOAT MUTH*****A !!!!!!!

72
General Banter / A Plea !!!!
« on: March 24, 2009, 11:16:40 am »
To ALL mobile phone manufacturers..

PLEASE REMOVE VIDEO CAPABILITY FROM ALL MOBILE PHONES...

It's made a youtube search a right pain in the ass !!!!!

I'd say at least half of the things on youtube are recorded on mobiles, the picture is SH1T, the sound is SH1t and overall, its guess what... SH1T...

And a plea to people that record things at concerts on mobiles then upload them to youtube...

STOP FU*KING DOING IT... FOR THE LOVE OF GOD STOP IT !!!!!!

73
General Banter / 3rd Gen Identification...
« on: March 11, 2009, 10:33:38 pm »
any ideas what this yellow one is?


74
Classifieds & Useful eBay Links / 3rd gen bits for sale...
« on: March 07, 2009, 10:17:23 am »
not mine but thought the bonnet might help someone out....


All 3rd gen stuff

fibreglass bonnet good condition -£30
t tops £30 the pair
305 late 86 cylinder heads good condition, - £30 the pair
700r4 transmission in bits in a box, everythings there, needs rebuilding - free to good home
305 engine block with pistons and crank, needs a re build - free
Sump pan red, - £15
holley 4 barrel carb and manifold, £30
Rochester 4 barrel carb £15
distributor, 305 v8 for a carb engine, £15
ive got loads of bits i dont want to throw them as someone might need them, i have exhaust manifolds, air con pumps, starters, just ask ive probably got it


http://www.classiccamaroclubuk.com/phpBB3/viewtopic.php?f=15&t=161

75
General Banter / London meet, 14th March...
« on: March 05, 2009, 11:05:45 pm »
same time, same place, 12 noon at the harvester (navigation inn) in chingford..

Phil, as you are bringing the CDs from RKs place any chance you could bring those engine slings with you please, i'll be needing them shortly to pull the motor out of the breaker fox body :)

Pages: 1 2 [3] 4 5 ... 10