Author Topic: Giggidy, giggidy, giggidy !!! (Read 1185 times)

Roadkill · « **on:** August 10, 2006, 04:12:08 pm »

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=170000274241&fromMakeTrack=true

Bargain !

55starchief · « **Reply #1 on:** August 10, 2006, 04:13:44 pm »

that would go nice with your tri power

Roadkill · « **Reply #2 on:** August 10, 2006, 04:16:40 pm »

. . And the Offy Valve covers . . . . .

EDGE · « **Reply #3 on:** August 10, 2006, 04:21:04 pm »

why haven't you bought that yet???

EDGE

Sammy Lou · « **Reply #4 on:** August 10, 2006, 04:21:35 pm »

WTF?

?

55starchief · « **Reply #5 on:** August 10, 2006, 04:26:36 pm »

Quoting: Sammy Lou

WTF?

?

it goes in your V luv

Roadkill · « **Reply #6 on:** August 10, 2006, 04:30:14 pm »

Quoting: EDGE

why haven't you bought that yet???

Getting a shipping quote first.

ianjpage · « **Reply #7 on:** August 10, 2006, 10:03:09 pm »

Sammy Lou · « **Reply #8 on:** August 11, 2006, 08:17:22 am »

Quoting: 55starchief

it goes in your V luv

whats that?

EDGE · « **Reply #9 on:** August 11, 2006, 09:32:42 am »

Quoting: Sammy Lou

whats that?

ribbed... for her pleasure

EDGE

55starchief · « **Reply #10 on:** August 11, 2006, 09:36:47 am »

ianjpage · « **Reply #11 on:** August 11, 2006, 10:23:54 am »

Quoting: EDGE

ribbed... for her pleasure

EDGE · « **Reply #12 on:** August 11, 2006, 11:50:40 am »

I'm always thinking of tha ladies

Sammy Lou · « **Reply #13 on:** August 11, 2006, 02:48:33 pm »

yeah but what is it?

55starchief · « **Reply #14 on:** August 11, 2006, 02:50:57 pm »

Quoting: Sammy Lou

yeah but what is it?

Its a valley pan, it goues in the valley between the left and right banks of cylinders on the engine. It stops the oil etc coming out.

Jamieg285 · « **Reply #15 on:** August 11, 2006, 02:55:48 pm »

Quoting: 55starchief

Its a valley pan, it goues in the valley between the left and right banks of cylinders on the engine. It stops the oil etc coming out.

I thought that was where the intake manifold went!

55starchief · « **Reply #16 on:** August 11, 2006, 02:56:55 pm »

Quoting: Jamieg285

I thought that was where the intake manifold went!

on older engines your intake manifold sits higher so you have a valley pan

Jamieg285 · « **Reply #17 on:** August 11, 2006, 02:58:20 pm »

Quoting: 55starchief

on older engines your intake manifold sits higher so you have a valley pan

Ah, didn't know that. A 'bit' like the air gap manifold then?

55starchief · « **Reply #18 on:** August 11, 2006, 03:00:37 pm »

its the black section under the manifold in this pic

Jamieg285 · « **Reply #19 on:** August 11, 2006, 03:03:19 pm »

OK, so why worry about a ribbed one then? You can hardly see it.

55starchief · « **Reply #20 on:** August 11, 2006, 03:04:35 pm »

Quoting: Jamieg285

OK, so why worry about a ribbed one then? You can hardly see it.

there is about 2" clearance between the valley pan and the intake mate, just the pic doesnt show that

Pod · « **Reply #21 on:** August 11, 2006, 03:07:29 pm »

I still wouldn't have thought you'd see much of it, especially once the other bits are on and the engine's in the car.

FUBAR · « **Reply #22 on:** August 11, 2006, 03:12:40 pm »

Dean's new manifold is a bit more 'gappy' than graeme's one above though so you will see it from the sides etc.

Roadkill · « **Reply #23 on:** August 13, 2006, 11:10:20 pm »

Quoting: 55starchief

there is about 2" clearance between the valley pan and the intake mate, just the pic doesnt show that

Quoting: FUBAR

Dean's new manifold is a bit more 'gappy' than graeme's one above though so you will see it from the sides etc.

There is a much bigger gap between the valley pan and manifold on the Caddy - about 4" . . . Also, as mentioned, on the caddy lump it's much more visable . . . . . especially after I'd've finished rearranging the "bits" at the front of the block.

Oh,

Quoting: Seller

Yes it is aluminum. Cast from virgin 356 alloy. Will polish to show quality. Shipping is 22.00

Seems like a good deal . . . .

FUBAR · « **Reply #24 on:** August 13, 2006, 11:12:28 pm »

Quoting: Roadkill

Quoting: Seller
Yes it is aluminum. Cast from virgin 356 alloy. Will polish to show quality. Shipping is 22.00

Seems like a good deal . . . .

Do it Do it Do it