Author Topic: 3rd gen stuff (Read 2210 times)

Gator · « **on:** March 31, 2008, 09:10:28 pm »

need some bits and bobs for Phils IROC

need some links to suppliers and this has to be the place to git em

FUBAR · « **Reply #1 on:** March 31, 2008, 10:00:13 pm »

www.moderndaymuscle.com
Used these guys LOADS of times, they're excellent.

http://www.hawksthirdgenparts.com/index.asp?PageAction=VIEWCATS&Category=77

http://www.tpis.com/
(for Go-Faster bits)

http://www.spohn.net/
Just ask deano about these guys

HardRockCamaro · « **Reply #2 on:** March 31, 2008, 11:24:01 pm »

Indeed good stuff. I've used TPIs a few times, very helpful.

To add:

www.fbodymotorsports.com

www.classicindustries.com

On a generic level I'd also include www.summitracing.com

FUBAR · « **Reply #3 on:** March 31, 2008, 11:32:23 pm »

Fbodymotorsports and Hawks are the same place aren't they?

Gator · « **Reply #4 on:** April 01, 2008, 06:16:14 am »

job done thanks fellers

Roadkill · « **Reply #5 on:** April 01, 2008, 06:40:39 am »

There's a company on eBay - TPI parts- that have got LOADS of cool stuff.

http://stores.ebay.com/TPI-PARTS

Gator · « **Reply #6 on:** April 01, 2008, 05:02:05 pm »

Quoting: Roadkill

There's a company on eBay - TPI parts- that have got LOADS of cool stuff.

\" target=\"_blank\" rel=\"nofollow\">http://stores.ebay.com/TPI-PARTS

genius thanks Dean

Rocky · « **Reply #7 on:** April 01, 2008, 05:22:16 pm »

Classic industries or yearone have the best stock but are expensive on shipping, modern day muscle are best on shipping and price,
Any secondhand bits you need give me a shout, got alot of new bits in too

Gator · « **Reply #8 on:** April 01, 2008, 06:09:08 pm »

Quoting: Rocky

Classic industries or yearone have the best stock but are expensive on shipping, modern day muscle are best on shipping and price,
Any secondhand bits you need give me a shout, got alot of new bits in too

i am looking for an iroc hood

55starchief · « **Reply #9 on:** April 01, 2008, 06:12:18 pm »

You might want to call useless as i think they had one with a dented corner that philo was after

Rocky · « **Reply #10 on:** April 01, 2008, 06:18:25 pm »

I went after all their panels but they wanted too much for them especially being repo ones.

Rocky · « **Reply #11 on:** April 01, 2008, 06:19:30 pm »

Quoting: Gator

i am looking for an iroc hood

Cant you repair the one you have, a non original one will need quite a bit of work.

Gator · « **Reply #12 on:** April 01, 2008, 06:39:27 pm »

dunno it may be possible to fix, are they hard to come by then ?

useless auto is banned, will not buy from them

Roadkill · « **Reply #13 on:** April 01, 2008, 07:50:56 pm »

Quoting: Gator

useless auto is banned, will not buy from them

philoldsmobile · « **Reply #14 on:** April 01, 2008, 09:08:42 pm »

Quoting: 55starchief

You might want to call useless as i think they had one with a dented corner that philo was after

good luck actualy getting the bonnet out of them, i got as far as agreeing a price, bringing cash, and seeing the box it was in... in the approximatley 3 years i was trying they never had time to get a forklift and get the bonnet down...

Gator · « **Reply #15 on:** April 01, 2008, 09:26:56 pm »

hood

philoldsmobile · « **Reply #16 on:** April 01, 2008, 09:41:41 pm »

bonnet.. its not a convertible, and its not made of mohair...

FUBAR · « **Reply #17 on:** April 02, 2008, 12:54:37 pm »

"Engine cover"...

If you're shifty and its an MR2

Gator · « **Reply #18 on:** April 02, 2008, 04:28:37 pm »

if it had a bonnet it would be skipping through a summer meadow with a basket of flowers

hood

FUBAR · « **Reply #19 on:** April 02, 2008, 04:42:25 pm »

Anyway...

So what you getting Mr Gator?

Gator · « **Reply #20 on:** April 02, 2008, 05:16:32 pm »

service parts matey dizzy cap and rotor as mine is buggered

have got some bits n bobs coming off ebay to tidy it up a bit

Gator · « **Reply #21 on:** April 07, 2008, 04:07:44 pm »

bloody eckin schmeck

hawksthirdgenparts are good cap and rotor delivered in under 3 days

nice one Ryan cheers

FUBAR · « **Reply #22 on:** April 07, 2008, 04:25:37 pm »

Quoting: Gator

hawksthirdgenparts are good cap and rotor delivered in under 3 days

Yeah my T-Top weatherstrips turned up pretty quick too, + they said the Headliner set i want would only take 3-4 days to be collectable at heathrow.

Makes you think all the delays are caused by the UK service doesn't it

CJ-IROCZ · « **Reply #23 on:** April 07, 2008, 04:59:22 pm »

Just waiting to hear back about the shipping Ryan. I'll wait til tonight and then email again in the morning

FUBAR · « **Reply #24 on:** April 07, 2008, 05:08:19 pm »

Quoting: CJ-IROCZ

Just waiting to hear back about the shipping Ryan. I'll wait til tonight and then email again in the morning

Cheers dude. out of interest what sort of delivery time are we looking at via your friend?