Messages

1

General Banter / Can somebody give me $19,000 please

« on: May 14, 2013, 07:27:50 pm »

yep same as my el Camino. I prefer the column shifter.

2

General Banter / Is this a lot for an exhaust?

« on: March 24, 2013, 08:58:48 pm »

Magnaflow has gone up alot recently. as a UK supplier they have just made it too hard to import them at a good price now.
We mainly work with Stainless works now as no one can compete with their products quality.

3

Projects / Ryan's IROC Thread

« on: January 09, 2013, 08:07:47 pm »

Columns are all the same by GM either tilt or not. Only early GM cars differ slightly. Rockauto will have one for your car think it is £25 for a Delco one.

4

General Banter / Another Camaro / Battery / Alternator Dilemma !!!

« on: October 30, 2012, 08:26:34 am »

4th gens are prone to battery draw, You can test the draw like Andy has said. Its normally the main interior light fuse which is sometimes linked to the central locking for the alarm. As its easy to get to alot just remove the fuse when not using the car for a while.

5

General Banter / . . And that's why I think U.S parts dealers in the U.K are rip-off merchants !

« on: June 20, 2012, 07:40:00 pm »

lol, Yeah not the best rep.

6

General Banter / . . And that's why I think U.S parts dealers in the U.K are rip-off merchants !

« on: June 19, 2012, 07:23:51 pm »

Wasnt cut maple salvage was it??

7

General Banter / PH Carpool - Pontiac Trans Am WS6

« on: December 13, 2011, 08:42:17 pm »

I have been in that car pulls really well, The guy lives in Watford.

8

Projects / Roadkill's 1983 Chevy Z28 - (Work Starts on Page 5)

« on: December 05, 2011, 09:48:21 pm »

Got a big block pontiac motor Im doing at the moment, Done loads of SBC
my vert will be running 400bhp plus very soon, my yellow Iroc has a tuned up SBC with lingenfelter super ram. Oh and my uncles 73 TA runs in the 9-10 secs now not bad when its driven there.

9

Projects / Roadkill's 1983 Chevy Z28 - (Work Starts on Page 5)

« on: December 05, 2011, 09:41:03 pm »

I havnt had any probs with the engines I have built

10

General Banter / Ring Brothers 1970 Camaro.

« on: November 04, 2011, 09:01:18 pm »

Not as good as Troys cars

11

General Banter / How many?

« on: July 22, 2011, 08:46:56 pm »

4x V8s  a 6 cylinder Beemer and a 4 pot Astra. Think that makes 42 not all on the road though.

12

General Banter / a few snaps from billing summernats

« on: June 21, 2011, 06:58:17 am »

What dash did the vert have in it, Looks like a 91 to me with a private plate on it. Probably has the TBI motor in it.

13

General Banter / GM American Pride 5th Gen Maro.

« on: April 25, 2011, 08:09:23 pm »

Not the best airbrush work I have seen but it is impressive to cover a whole car.
Air brushing cars is not my thing though but each to their own

14

Projects / 1968 firebird take 2

« on: April 10, 2011, 07:00:36 pm »

finished it last year Dont think Steve is around here anymore.

15

General Banter / Nice day for a drive out ?

« on: March 13, 2011, 07:04:21 pm »

Sold it.










Only joking just cut the whole back end out of it.

16

General Banter / Nice day for a drive out ?

« on: March 13, 2011, 06:31:11 pm »

Did you pop in to see my new car?

17

General Banter / Mot for wendy's camaro

« on: February 20, 2011, 01:13:54 pm »

Have spohn drop links in stock and maybe some other bits.

18

General Banter / Think your car uses too much fuel?...

« on: February 02, 2011, 08:11:27 pm »

Seen that model in a museum in Pomona, made me jump when it started dumping the fuel, was really loud I thought I had broken it.

19

General Banter / Battery or Alternator?

« on: November 26, 2010, 08:43:49 am »

Dont you have a volt meter in the car, When idling it should show around 13.5-14V if the alternator is working, if its around 12V its not working.
The cold weather can however finish off an old battery quite easily.

20

Questions and Queries / Arghh - help

« on: November 04, 2010, 09:29:23 pm »

Thats mine, I do have a good tank out of it but someone is supposed to be picking it up unless you can come sooner.

21

Projects / Ryan's IROC Thread

« on: September 16, 2010, 07:38:38 am »

Rust creeps under the clear POR15 it is thicker than the black but not as good rust protection. Is ok on clean steel but not over rust like they say it is. Hot Rod magazine found the same problem when they tested it.

22

Projects / Ryan's IROC Thread

« on: September 07, 2010, 07:47:18 am »

Have you checked your idler arm and front steering components, That will cause vibration at speed and is a common fault on 3rd gens? If you have trouble getting blasting done I can media blast most things for you even rubber or plastic

23

Suggestions / NSRA - Old Warden Park 23-25th July [Sunday]

« on: July 25, 2010, 06:50:34 pm »

The 2nd gen was in a mag quite a few years ago will try and dig it out.
Looks like the first gen is sporting Ring Brothers hood hinges or similar.
Im wanting to do that for the 3rd gens but need to get someone to CNC the bits up.

24

Suggestions / NSRA - Old Warden Park 23-25th July [Sunday]

« on: July 25, 2010, 05:25:41 pm »

Havnt seen that 2nd gen in years looks like a good turn out.

25

Classifieds & Useful eBay Links / 1986 350ci manual Iroc breaking

« on: July 22, 2010, 07:12:04 pm »

Sunvisers are good light grey in colour, Roof lining is also good if anyone needs one.
The customer wants to seel the rear end complete.
If you take a pic of the spring you need I may have one somewhere else.