4326
Questions and Queries / FAO 55Starchief - bringing stuff back from the states
« on: October 18, 2005, 08:55:17 pm »
BTW, I came up with some great ideas for security and the push button starter, we'll have to discuss it later.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
4327
Questions and Queries / FAO 55Starchief - bringing stuff back from the states
« on: October 18, 2005, 08:51:47 pm »
No tools & no knowledge...
I'm just adding spanner-monkey ness to this melting pot ATM
Everyone starts somewhere. I was mighty impressed that I managed to change my oil seal on my own. (Albeit with a couple of calls for advice mid--way)
I'm just adding spanner-monkey ness to this melting pot ATM
Everyone starts somewhere. I was mighty impressed that I managed to change my oil seal on my own. (Albeit with a couple of calls for advice mid--way)
4328
Questions and Queries / FAO 55Starchief - bringing stuff back from the states
« on: October 18, 2005, 08:44:30 pm »
wow. Nice bit of kit . . . . I you get it can I borrow it 
Of course, we can probably share the workload on each others cars.
When are you thinking of getting your stuff over?
Of course, we can probably share the workload on each others cars.
When are you thinking of getting your stuff over?
4329
Questions and Queries / FAO 55Starchief - bringing stuff back from the states
« on: October 18, 2005, 08:43:34 pm »
Might be a little on the heavy side mate
I was expecting that, so no worries.
when do you need it as if LRK does his suspension and engine you could consolidate the shipment at outlaw engines
I was hoping for early in the new year (or earlier). The bushings that you brought back are technically a xmas present, so I can't go putting them on untl Late Dec anyway.
I was expecting that, so no worries.
when do you need it as if LRK does his suspension and engine you could consolidate the shipment at outlaw engines
I was hoping for early in the new year (or earlier). The bushings that you brought back are technically a xmas present, so I can't go putting them on untl Late Dec anyway.
4330
Questions and Queries / FAO 55Starchief - bringing stuff back from the states
« on: October 18, 2005, 08:28:29 pm »
Is this too big for you to bring back? I don't want to take the piss....
http://www.toolrage.com/prodView.asp?idproduct=185
http://www.toolrage.com/prodView.asp?idproduct=185
4331
Suggestions / Forum Layout??
« on: October 18, 2005, 08:00:45 pm »
would be nice if peoples projects were stickied at the top of sections if this is possible.
Are you talking about the recent posts list? I don't think you can stick them in there.
Are you talking about the recent posts list? I don't think you can stick them in there.
4332
Suggestions / Forum Layout??
« on: October 18, 2005, 07:57:07 pm »
would be nice if peoples projects were stickied at the top of sections if this is possible.
Also can individuals have control of there project thread ie remove old/unwanted posts or would this require a subsection on projects with each project as a new section and the owner of the project a mod on that section only
Took me a while to digest this one :
- Do we need to sticky the projects? They have their own sub-forum, and I can't see it being so busy that any will drop of the page.
- Moderators is a global option (at the moment - may be hackable in the future). For now I have assigned me and the reps as mods, but also suggested that others are too - will await a response.
- Failing that, I am sure that the mods can repsond favourable to polite requests/bribery
Also can individuals have control of there project thread ie remove old/unwanted posts or would this require a subsection on projects with each project as a new section and the owner of the project a mod on that section only
Took me a while to digest this one :
- Do we need to sticky the projects? They have their own sub-forum, and I can't see it being so busy that any will drop of the page.
- Moderators is a global option (at the moment - may be hackable in the future). For now I have assigned me and the reps as mods, but also suggested that others are too - will await a response.
- Failing that, I am sure that the mods can repsond favourable to polite requests/bribery
4333
Suggestions / Forum Layout??
« on: October 18, 2005, 07:27:30 pm »
Now we are up and running, and we seem to be going well, Can I have some suggestions for the forum layout.
I added a few basic ones just to get us started, but I think that it can be better. There is the option to add a sub-titles to separate into sections if required. See Naughty Section
Go for it....
I added a few basic ones just to get us started, but I think that it can be better. There is the option to add a sub-titles to separate into sections if required. See Naughty Section
Go for it....
4334
Suggestions / How do you think "Project X" is progressing...
« on: October 18, 2005, 07:09:45 pm »
?? so imgs thumbnails it, img doesn't ?? is that right?
4335
Projects / Ryan's Camaro Project Thread...
« on: October 18, 2005, 06:32:01 pm »
Would the bits i've got fit on it / in it?
Some bit yes, some no. Not sure exactly what bits yet, but it is worth bearing in mind.
Some bit yes, some no. Not sure exactly what bits yet, but it is worth bearing in mind.
4336
Suggestions / How do you think "Project X" is progressing...
« on: October 18, 2005, 06:27:44 pm »
Yes, once I have worked out how to add it - going to check the manual now
4337
Projects / Ryan's Camaro Project Thread...
« on: October 18, 2005, 06:16:01 pm »
I Thought you had another motor already, Jamie
Yes and no. I have a 327 block and crank - that's it. It needs machining and absolutely everything buying for it. If I find a complete runner/something that only needs a bit of work I might be tempted.
Yes and no. I have a 327 block and crank - that's it. It needs machining and absolutely everything buying for it. If I find a complete runner/something that only needs a bit of work I might be tempted.
4338
Projects / Ryan's Camaro Project Thread...
« on: October 18, 2005, 05:52:05 pm »
I wanted something basically sound that wouldn't need a lot of money. It's to go in the car whilst I take the 400 out for the full works.
It needs to be sellable when the 400 goes back in.
It needs to be sellable when the 400 goes back in.
4339
Suggestions / How do you think "Project X" is progressing...
« on: October 18, 2005, 05:38:35 pm »
Yes, another thing already on the list, but I thought we'd get more important stuff done first.
4340
Projects / Roadkill's 1983 Chevy Z28 - (Work Starts on Page 5)
« on: October 18, 2005, 05:37:43 pm »
4 is definitely the best option listed, but what about getting a cheap 350 over here and rebuilding that?
4341
Projects / Ryan's Camaro Project Thread...
« on: October 18, 2005, 05:36:29 pm »
I will be putting his V8 into my car & removing my 305 (needs a complete rebuild)
Ah, didn't realise it was only a 305. I want at least a 327.
Ah, didn't realise it was only a 305. I want at least a 327.
4343
General Banter / How do I get an Avatar ???
« on: October 18, 2005, 05:30:43 pm »
<sniff>
But I like gifs.
OK, how about - a mod's can delete gif's that annoy them?
But I like gifs.
OK, how about - a mod's can delete gif's that annoy them?
4344
General Banter / How do I get an Avatar ???
« on: October 18, 2005, 05:18:48 pm »
I will be updating the parameters sometime soon, to allow larger(in both respects) files.
Personally I think we need to apply a 'no animated GIFs in avatar ' rule - they annoy the hell out of me.
Personally I think we need to apply a 'no animated GIFs in avatar ' rule - they annoy the hell out of me.
4345
Projects / Ryan's Camaro Project Thread...
« on: October 18, 2005, 05:16:08 pm »
So what's the plan? Take the0 (V6 
) engine and put it in yours?
If so, what's happening with the v8 (
) in yours? I might be interested in it if it hasn't already got a destination.
) engine and put it in yours?If so, what's happening with the v8 (
) in yours? I might be interested in it if it hasn't already got a destination.
4346
Suggestions / How do you think "Project X" is progressing...
« on: October 18, 2005, 04:21:10 pm »
It can be increased - are you talking pic size i.e. 60x60 to 75x75 or file size i.e 100K to 200K
4347
Suggestions / How do you think "Project X" is progressing...
« on: October 18, 2005, 03:58:32 pm »
It's coming - next item will be user rankings though - I know you want to know your post counts.
4348
General Banter / Trunk Monkey Anti-theft system
« on: October 18, 2005, 07:38:04 am »
So that's why PhilO was in the Neon boot. 
4349
General Banter / Test - Lets see who's here
« on: October 18, 2005, 02:07:42 am »
Testing - I'm here, but then you'd expect that.