Print Page - Sanding disks for use with grinders

Title: Sanding disks for use with grinders
Post by: Jamieg285 on July 31, 2006, 09:00:05 AM

Anyone know what these are specifically called/what sort are best and where to get them?

Title: Sanding disks for use with grinders
Post by: 55starchief on July 31, 2006, 09:37:53 AM

Try the local bodyshop supplier mate, MK paint should have them you will also need the adaptor

Title: Sanding disks for use with grinders
Post by: Jamieg285 on July 31, 2006, 09:41:58 AM

What were the ones being used up at the barn? I don't remember seeing an adapter then?

Title: Sanding disks for use with grinders
Post by: Jamieg285 on July 31, 2006, 09:42:30 AM

Or, are we talking, good ole redneck technology (http://www.mkb.cc/forum/smileys/lol.gif)

Title: Sanding disks for use with grinders
Post by: ianjpage on July 31, 2006, 09:42:41 AM

lol no we kinda of omitted the adapter (not normally recommended!)

Title: Sanding disks for use with grinders
Post by: ianjpage on July 31, 2006, 09:42:58 AM

Quoting: Jamieg285

Or, are we talking, good ole redneck technology

Yup (http://www.mkb.cc/forum/smileys/up.gif) (http://www.mkb.cc/forum/smileys/up.gif) (http://www.mkb.cc/forum/smileys/up.gif) (http://www.mkb.cc/forum/smileys/up.gif)

Title: Sanding disks for use with grinders
Post by: 55starchief on July 31, 2006, 09:44:22 AM

philos grinder had the adaptor on it mine didnt, not recommended as the discs fly of without the adaptor.

Title: Sanding disks for use with grinders
Post by: Rocky on July 31, 2006, 04:47:59 PM

You will only need one if your just doing that bit of bodywork,unless you can get a spot blaster,so you dont spray the grit everywhere

MKB Forum

Forum Information => Questions and Queries => Topic started by: Jamieg285 on July 31, 2006, 09:00:05 AM