1
Projects / Re: Project - Paperweight - Now The NEW Coffee Table Project !!!
« on: October 01, 2016, 11:30:38 am »
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
3
Important Announcements / Re: So, this is happening...
« on: July 27, 2016, 09:58:13 pm »
Cheers Ryan 
4
Important Announcements / Re: So, this is happening...
« on: July 23, 2016, 06:25:18 pm »
Thank you all 
5
Important Announcements / Re: So, this is happening...
« on: July 22, 2016, 12:03:40 pm »
Maybe panicking is a bit strong. Apprehensive at being responsible for a life other than my own is probably a better synopsis. Good job I've got an amazing wife to share the task with.
6
Important Announcements / Re: So, this is happening...
« on: July 22, 2016, 08:22:16 am »
He or she will be making an appearance in mid December. Not panicking at all, honest... 
8
Projects / Re: Roadkill's 1983 Chevy Z28 - (Work Starts on Page 5)
« on: June 17, 2016, 11:56:25 am »
Hmm, I would have put heat shrink over the joints. Water get's into everything under a car, and a bit of corrosion over time could throw the measurements out...
9
General Banter / Happy Birthday Roadkill
« on: June 15, 2016, 11:27:41 am »
Have a good one Dean-O
10
Projects / Re: Roadkill's 1958 Cadillac - PROJECT THREAD
« on: June 07, 2016, 12:00:44 pm »
Have you looked at any of the distribution blocks made by nitrous manufacturers? There are plenty of 8way block out there.
11
Projects / Re: Roadkill's 1983 Chevy Z28 - (Work Starts on Page 5)
« on: June 06, 2016, 11:14:20 pm »
Maybe ask about extending the wires yourself and what wire is appropriate for the job. Just double check that it won't have any consequences for the operation and accuracy of the sensor...
At least 'the Bosch' came back to you...
At least 'the Bosch' came back to you...
12
Suggestions / Re: This may be a controversial suggestion...
« on: June 06, 2016, 11:10:13 pm »
It would be good if we could somehow save the history of the forum. I do look back on stuff and wish I was as good at documenting projects as Dean is, but alas If I get into a job I get to involved in what i'm doing and totally forget... I check the forum regularly but I to fail to contribute for the aforementioned reason. There is however something a little special about the forum compared to Facebook, mainly because Facebook is filled with tat and sharing bollocks where as there is some real content in the forum and new posts are always worth reading. Quality over quantity.... Would be sad to see it go, but it is fading away and I guess it is an inevitable result.
13
Projects / Re: Roadkill's 1983 Chevy Z28 - (Work Starts on Page 5)
« on: May 26, 2016, 04:58:25 pm »
The contact details on the data sheet for the sensor you have are as follows:
Europe: Bosch Engineering GmbH Motorsport Robert-Bosch-Allee 1 74232 Abstatt Germany Tel.: +49 7062 911 9101 Fax: +49 7062 911 79104 motorsport@bosch.com www.bosch-motorsport.de
Try them and tell them what your after and what you have currently.
Europe: Bosch Engineering GmbH Motorsport Robert-Bosch-Allee 1 74232 Abstatt Germany Tel.: +49 7062 911 9101 Fax: +49 7062 911 79104 motorsport@bosch.com www.bosch-motorsport.de
Try them and tell them what your after and what you have currently.
14
Projects / Re: Roadkill's 1983 Chevy Z28 - (Work Starts on Page 5)
« on: May 25, 2016, 12:22:37 pm »
Try Bosch instead...
15
Projects / Re: Roadkill's 1983 Chevy Z28 - (Work Starts on Page 5)
« on: May 17, 2016, 12:46:30 pm »
This 'might' be what you want, but best to check with Innovate support...
http://www.lambdasensor.com/main/bosch/price.pl?item=0258007359
http://www.lambdasensor.com/main/bosch/price.pl?item=0258007359
16
Projects / Re: Roadkill's 1983 Chevy Z28 - (Work Starts on Page 5)
« on: May 16, 2016, 11:47:11 pm »
The link cable looks pretty long, can it not be routed to a better spot?
17
Projects / Re: Roadkill's 1983 Chevy Z28 - (Work Starts on Page 5)
« on: May 16, 2016, 09:17:26 pm »
Datasheet for reference:
http://www.bosch-motorsport.com/media/catalog_resources/Lambda_Sensor_LSU_42_Datasheet_51_en_2779111435pdf.pdf
I'ts an Innovate system right? so does it not have a cable from the sensor to the unit as follows, and can you not feed the cable to the logger through the panel the other way and have the connector outside the car? these connectors are meant to survive that type for environment and are fully sealed.
https://tunertools.com/prodimages/large/IN-3897-1.jpg
http://www.bosch-motorsport.com/media/catalog_resources/Lambda_Sensor_LSU_42_Datasheet_51_en_2779111435pdf.pdf
I'ts an Innovate system right? so does it not have a cable from the sensor to the unit as follows, and can you not feed the cable to the logger through the panel the other way and have the connector outside the car? these connectors are meant to survive that type for environment and are fully sealed.
https://tunertools.com/prodimages/large/IN-3897-1.jpg
19
General Banter / Re: Playing with colours
« on: April 15, 2016, 07:02:54 pm »
third row third column
20
General Banter / Re: Profanisaurus Rex, word of the week.....
« on: February 16, 2016, 07:18:39 am »
one: n. A poking. The SI unit of sex, given to a woman by a man and measured from the moment it goes in to to moment it goes off. Equivalent to six tenths of a portion, 180% of some, and 2.36 bits of the other.
21
General Banter / Re: Profanisaurus Rex, word of the week.....
« on: February 10, 2016, 06:46:58 am »
abra-kebabra: n. A magical illusion performed after a night on the piss, whereby a traditional Turkish delicacy is made to disappear down the performer's throat, only to reappear a short time later on the back of a taxi driver's head.
22
Projects / Re: Roadkill's 1958 Cadillac - PROJECT THREAD
« on: February 05, 2016, 12:55:54 pm »
I see you've got some nice big bosses on the intake runners for some direct port nitrous injection. Best get those drilled and tapped for nozzles while it's on the machine... 
23
General Banter / Re: Profanisaurus Rex, word of the week.....
« on: January 26, 2016, 07:12:42 am »
An old favourite poped up on my phone as the daily entry this morning...
jizzaster: n. The leaving of incriminating masturbatory evidence behind. ‘That wad of spunk on the carpet was a fucking jizzaster. Not to mention the Fuck Truck tape in the video, or the circle of open wank mags on the living room floor. Or me lying unconscious in the middle of it all with my trousers round my ankles and my red-raw cock in my hand.'
jizzaster: n. The leaving of incriminating masturbatory evidence behind. ‘That wad of spunk on the carpet was a fucking jizzaster. Not to mention the Fuck Truck tape in the video, or the circle of open wank mags on the living room floor. Or me lying unconscious in the middle of it all with my trousers round my ankles and my red-raw cock in my hand.'
24
General Banter / Re: Profanisaurus Rex, word of the week.....
« on: January 23, 2016, 10:31:00 am »
yachting: n. The stirring sight of a dog in full sail, tacking its way across the living room carpet, attempting to remove the barnacles from its keel.
25
General Banter / Re: Profanisaurus Rex, word of the week.....
« on: January 15, 2016, 10:20:13 am »
M & S turd: euph. A shite which is worthy of special attention due to its exceptional quality. “This is not just a turd, this is a five-day matured, chicken vindaloo with garlic naan and eight bottles of Cobra turd.”