picked up a new, old mig welder ....

Started by art b, October 09, 2014, 06:24:42 AM

Previous topic - Next topic

art b

got this yesterday ....

murex 200 amp ,single phase,

it dident  look very big on ebag....

but its 26inches tall....


http://s53.photobucket.com/user/artburge/media/artburge007/murex200_zpsfd28f307.jpg.html\" target=\"_blank\" rel=\"nofollow\">
This forum needs, ''YOU'' posting,Not just reading ! :moon:


art b

it can only improve my welding ..

gave it a clean up ...it came with a roll of wire ..

http://s53.photobucket.com/user/artburge/media/artburge001/2df02203-a72b-4be6-bb16-a5f4ccd79eef_zps617fa094.jpg.html\" target=\"_blank\" rel=\"nofollow\">



http://s53.photobucket.com/user/artburge/media/artburge001/DSCF1011_zps28332286.jpg.html\" target=\"_blank\" rel=\"nofollow\">


there are alot of gubbins indide ...



http://s53.photobucket.com/user/artburge/media/artburge001/DSCF0997_zps383fd313.jpg.html\" target=\"_blank\" rel=\"nofollow\">
This forum needs, ''YOU'' posting,Not just reading ! :moon:

Cunning Plan

Looks usable!  

Does a 2-phase and 3-phase welder plug into 240 mains as well or are they hard wired?
1968 VW T2 Bay Bus (currently being restored and upgraded)
1999 Jeep Cherokee XJ (modern classic daily driver)

art b

you can use some 3phase as single phase, on a 13amp plug,

but for the higher settings they will pull 15 amps plus..

i suspect mine can be 3 phase...
This forum needs, ''YOU'' posting,Not just reading ! :moon:

Roadkill


Cunning Plan

Quoting: art b
you can use some 3phase as single phase, on a 13amp plug,

but for the higher settings they will pull 15 amps plus..


If you did want to run a 3-phase welder as a 3-phase, how is it done?

What I mean is, is there a different connection like the 110V mains connectors?

Quoting: Roadkill
Whatcha making ?




Finishing that bus so I can have a ride hopefully

1968 VW T2 Bay Bus (currently being restored and upgraded)
1999 Jeep Cherokee XJ (modern classic daily driver)

art b

Quoting: Roadkill
So.

Whatcha making ?


vw welding..

Quoting: Cunning Plan

If you did want to run a 3-phase welder as a 3-phase, how is it done?  

What I mean is, is there a different connection like the 110V mains connectors?  


you connect it to 3 phases...
or as a single you use 1 phase and a neutral...
This forum needs, ''YOU'' posting,Not just reading ! :moon:

Titsy

Three phase connector (but then you have to have a three phase supply and you only really get that on commercial premises...:

Cunning Plan

Quoting: Titsy
Three phase connector (but then you have to have a three phase supply and you only really get that on commercial premises...:

Quoting: art b
you connect it to 3 phases...
or as a single you use 1 phase and a neutral...



Aha, that's what I was wondering!


Next question, why are there 5 connections? I would have thought it would be 4: 1 for each phase and 1 neutral
1968 VW T2 Bay Bus (currently being restored and upgraded)
1999 Jeep Cherokee XJ (modern classic daily driver)

art b

One per phase
One neutral
One earth...

Although you don't always need a neutral with some three phase equipment..
This forum needs, ''YOU'' posting,Not just reading ! :moon:

Cunning Plan

Quoting: art b
One per phase
One neutral
One earth.


Ah, okay.

Quoting: art b
vw welding


Does that mean we can have an update on your Bus project thread then?

1968 VW T2 Bay Bus (currently being restored and upgraded)
1999 Jeep Cherokee XJ (modern classic daily driver)

art b

Quoting: Cunning Plan
Does that mean we can have an update on your Bus project thread then?  


done ..
This forum needs, ''YOU'' posting,Not just reading ! :moon:


art b

This forum needs, ''YOU'' posting,Not just reading ! :moon:

art b

i have bought a bottle of argon gas mix  

5000L of gas for £33

it will give around 8 hrs of welding time...

may be having a go this weekend ...
This forum needs, ''YOU'' posting,Not just reading ! :moon:


Cunning Plan

Quoting: Jamieg285
Where do you store it:






1968 VW T2 Bay Bus (currently being restored and upgraded)
1999 Jeep Cherokee XJ (modern classic daily driver)

art b

Quoting: Jamieg285
Where do you store it:



as its stored at 230 bar

5m3  fits into a boc Y bottle
This forum needs, ''YOU'' posting,Not just reading ! :moon:

Roadkill

Quoting: art b
5m3 fits into a boc Y bottle


Ah, but that's not technically 5000 litres.  

art b

Quoting: Roadkill
Quoting: art b
5m3 fits into a boc Y bottle


Ah, but that's not technically 5000 litres.  



well im led to believe a room that is 5.2 m3 ...will have 5000 l of air in it
This forum needs, ''YOU'' posting,Not just reading ! :moon:

Cunning Plan

Quoting: Roadkill
Ah, but that's not technically 5000 litres.  


Quoting: art b
well im led to believe a room that is 5.2 m3 ...will have 5000 l of air in it



RK, it's your turn now...........
1968 VW T2 Bay Bus (currently being restored and upgraded)
1999 Jeep Cherokee XJ (modern classic daily driver)

Jamieg285

I need a refund then, as my bottles only got 20lt in it

Roadkill

Gas may occupy 5,000 litres of volume when released into the atmosphere, but clearly, under pressure, it's not 5,000 litres as it's in liquid form so is a fraction of that.

It's like saying that a full kettle holds 3,000 litres of steam . . . technically it does but there's other factors involved.


art b

Quoting: Roadkill
Gas may occupy 5,000 litres of volume when released into the atmosphere, but clearly, under pressure, it's not 5,000 litres as it's in liquid form so is a fraction of that.



so it is 5000 L of gas ..
This forum needs, ''YOU'' posting,Not just reading ! :moon: