combo as follows
350 4 bolt truck motor
bored .020 over.
stock crank balanced.
stock rods
stock replacement pistons
trickflow 195cc heads 64cc cnc chambers
comp cams xe284h cam,
crane 1.6 full roller rockers
edelbrock rpm air gap intake
650 mighty demon carb (first 4 runs on the dyno, they used they holley with a 3 inch spacer.)
compression is right around 9.7:1
the Motor spun with in single digets of what i fig out on desktop dyno.
of an average of 8 runs
412 @ 4100 TORQUE
405 @ 6100 POWER
best from the runs
420 @ 4300 TORQUE
406 @ 6100 POWER
prices was just under $4k and on pump gas 93 octane
***edit***
He said the demon made more tq and power than the holley so worth the extra money
