51
General Banter / Lego Car
« on: December 20, 2013, 09:05:17 pm »
Awesome
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
52
Classifieds & Useful eBay Links / Camaro Z28 for sale.
« on: December 09, 2013, 09:36:30 am »Quoting: F Body
Quiet literally a shed full of new GM sparesI'll let you know....
53
Classifieds & Useful eBay Links / Camaro Z28 for sale.
« on: December 07, 2013, 01:44:53 pm »Quoting: EDGE
Is a stocker worth about £8k? So this maybe £11-12k? Hate to say it but IMO that is a little high.
Personally I think you would be lucky to get £8k
54
General Banter / F Body is very pleased to announce ?
« on: December 04, 2013, 03:21:03 pm »
Congrats on your retirement....!
55
General Banter / F Body becomes a Teenager.
« on: November 21, 2013, 09:45:22 pm »
Just to confuse Marti more......
My TA is also a 99' and that will be 15 years old in January.
Get it yet Marti...?
My TA is also a 99' and that will be 15 years old in January.
Get it yet Marti...?
56
General Banter / F Body becomes a Teenager.
« on: November 17, 2013, 05:48:11 pm »Quoting: F Body
Yep the old Gal will be officially 13 years old tomorrow, she was born on Tuesday 16th November 1999 Surely you can do the Maths......14 years?
57
Projects / Can You Guess What's It's Gonna Be Yet ???
« on: October 16, 2013, 09:36:50 am »
Sandblast Cabinet.....?
Parts Wash Cabinet....?
?Parts Wash Cabinet....
?
59
General Banter / Scrore! x2 !!
« on: October 10, 2013, 07:46:27 pm »Quoting: Jamieg285
before the other guy gets back
Oooh the sneakiness. Love it.
60
General Banter / Scrore! x2 !!
« on: October 08, 2013, 03:21:51 pm »
I've taken the stance with this kind of seller before of reminding them that you have entered into a legally binding contract by bidding on his item.
Sometimes it works. Worth a go
Sometimes it works. Worth a go
61
Music & Movies / Third Gen Zombie......
« on: October 07, 2013, 03:38:39 pm »Quoting: FUBAR
post a link if people find where to stole it.....
62
Music & Movies / Third Gen Zombie......
« on: October 05, 2013, 06:39:28 pm »
Starring Dean's Camaro....
63
Classifieds & Useful eBay Links / Canon Lide 500 scanner
« on: October 03, 2013, 09:21:28 am »
Got one of these myself. Great scanner.
64
General Banter / How an Engine works GIF.
« on: September 18, 2013, 09:05:49 am »
Suck Squeeze Bang Blow
65
General Banter / Classics on Croxley Green Sunday 15th Sept 2013.
« on: September 12, 2013, 11:20:16 am »
Did this last year......
Damn. Working this time.
Damn. Working this time.
67
Music & Movies / New Episode of Roadkill
« on: July 31, 2013, 01:54:29 pm »
I've recently been downloading these from the states......Fantom Works
https://www.youtube.com/watch?feature=player_detailpage&v=F8dzvGOmnuE
Sorry...can't get that stupid embedding to work....Div
Not a bad show.
https://www.youtube.com/watch?feature=player_detailpage&v=F8dzvGOmnuE
Sorry...can't get that stupid embedding to work....Div
Not a bad show.
68
Food and Drink / Roadkill Brewery Co. (THE BEER THREAD)
« on: July 18, 2013, 07:58:14 pm »
And I just decanted a couple of litres into myself.....
69
Projects / Rob's Bandit Trans Am
« on: July 17, 2013, 09:12:30 pm »
Anti Corrosion undercoat. Meant for trains (SHHH...!)
All surfaces are getting a coat of Rust Inhibitor followed by a coat of this stuff then either undersealed or painted black.
All surfaces are getting a coat of Rust Inhibitor followed by a coat of this stuff then either undersealed or painted black.
70
Food and Drink / Roadkill Brewery Co. (THE BEER THREAD)
« on: July 17, 2013, 08:43:53 pm »Quoting: Incursus
Probably no bottles either?Time to start drinking Grolsch now before the impending arrival....
71
Projects / Rob's Bandit Trans Am
« on: July 17, 2013, 08:32:24 pm »
Rear End Repairs.....
With the bumper and cover out the way the true horror of the back end showed itself.....
Drivers Side wasn't too bad but Passenger side had rotted though to the frame rail end.
The fun of sourcing replacement parts began.....
The Tail Panel (Inner and Outer): I have cut out the bad bits and as they are quite simple, will be fabricated.
The Frame Rail (Passenger Side): As I have a rotten section at the front I originally intended replacing the entire rail, only to find out that they are not available as a replacement part (only the rear two thirds are currently available), so I set about attempting to find a good used one. Managed to source one from across the pond and the seller suggested cutting the sections out that I need as the entire rail is 62 inches long and shipping would be very high.....A little more work maybe but the saving would be useful. They subsequently arrived so cutting could begin...
With a little corrosion in the trunk floor to tackle at the same time...Leaf springs dropped for overhaul as well
Replacement frame rail "Z" cut to add a little more strength and the successfully welded into position.
May still sleeve the inside for added strength due to it being close to rear shackle point for Leaf Spring.
Just Panels to Fab now....
With the bumper and cover out the way the true horror of the back end showed itself.....
Drivers Side wasn't too bad but Passenger side had rotted though to the frame rail end.
The fun of sourcing replacement parts began.....
The Tail Panel (Inner and Outer): I have cut out the bad bits and as they are quite simple, will be fabricated.
The Frame Rail (Passenger Side): As I have a rotten section at the front I originally intended replacing the entire rail, only to find out that they are not available as a replacement part (only the rear two thirds are currently available
), so I set about attempting to find a good used one. Managed to source one from across the pond and the seller suggested cutting the sections out that I need as the entire rail is 62 inches long and shipping would be very high.....A little more work maybe but the saving would be useful. They subsequently arrived so cutting could begin...With a little corrosion in the trunk floor to tackle at the same time...Leaf springs dropped for overhaul as well
Replacement frame rail "Z" cut to add a little more strength and the successfully welded into position.
May still sleeve the inside for added strength due to it being close to rear shackle point for Leaf Spring.
Just Panels to Fab now....
72
Music & Movies / The "Unusual Cover Versions" Thread
« on: July 15, 2013, 10:03:15 am »
My fave...
Prodigy - Ghost Town
Prodigy - Ghost Town
73
General Banter / Don't leave your NOS bottle in the sun ?
« on: July 09, 2013, 08:09:34 pm »
Dodge Daytona or derivative
74
General Banter / billing this weekend
« on: June 15, 2013, 08:38:10 am »
Working...Couldn't escape
75
Classifieds & Useful eBay Links / Mercedes E320 CDI...
« on: June 14, 2013, 03:02:41 pm »
Now there's an invitation......